Asus AP1720-E1(AS4) Driver
ASUS APE1(AI2) · APD5 · APE1(AA4) · APE1(AS4) · APR-E1 · APE1(AI4) · APE1(AI4) · APE1(AS4). Get an instant quote for Asus manufacturers computer hardware parts at ASAP IT Technology Page - 8. Browse the wide range of IT hardware parts from Asus. ASUS APE1(AI2) · APD5 · APE1(AA4) · APE1(AS4) · APR-E1 · APE1(AI4) · APE1(AI4) · APE1(AS4).
|Supported systems:||Windows 2008, Windows XP, Windows Vista, Windows 7/8/10|
|Price:||Free* [*Free Registration Required]|
Asus AP1720-E1(AS4) Driver
Align the backplane with the raillike dents on the slot to ensure that it fits securely.
Rail-like dents 3. Slide the backplane into the slot until it fits.
If correctly installed, the outer edge of the backplane aligns with the corner of the drive Asus AP1720-E1(AS4). Connect the appropriate cables to the backplane.
The picture below shows the motherboard and device connectors where the power plugs Asus AP1720-E1(AS4) connected. Refer also to Asus AP1720-E1(AS4) at the end of this document for details on the power supply. To remove the power supply module: Loosen the thumbscrew that secures the power supply metal plate. Do not remove the thumb screw from the metal plate.
Index Buy OEM NEW ASUS L LCD INVERTER Asus (CL) at tamayatech
Thumbscrew 2. Hold the metal plate bar and push it downward to release the plate from the chassis. Remove the metal plate completely.
Metal plate bar 3. Use one hand to push the power supply module from inside the power supply cage, then carefully pull out the module Asus AP1720-E1(AS4) the chassis.
Asus APE1(AS4) Drivers Download for Windows 10, , 7, Vista, XP
Firmly hold the power supply module and insert it into the power supply cage. Push the power supply all the way in until its outer end aligns with Asus AP1720-E1(AS4) rear panel.
Be careful with the power supply cables when inserting the power supply module into the cage. Due to space constraints, Asus AP1720-E1(AS4) cables may get entangled with the installed components or other cables, causing the cables to break!
APE1/AS4 - ASUS APE1 AS4 INTELP DUAL FSB SATA W 6PCI
Place the metal plate flat on the outer end of the power supply module, flushed to Asus AP1720-E1(AS4) top of the chassis, while matching the four hooks with their corresponding holes on the rear panel. Hook matched to a hole 4. Hold the metal plate bar and push it upward to lock the hooks to their holes. At the same time, you may also push the top of the Asus AP1720-E1(AS4) plate to fit it completely.
Asus AP1720-E1 Personal Computer User Manual
Secure the metal plate with the thumb screw. To remove the floppy disk drive: Remove the screw that secures Asus AP1720-E1(AS4) drive to the chassis.
Carefully pull out the drive from the chassis until you see the cables connected to the drive. Asus AP1720-E1(AS4) the floppy disk cable and power cable from the drive to completely release the drive.
Position the floppy drive vertically with the eject button on the left side close to the HDDs. Connect Asus AP1720-E1(AS4) drive signal cable and power cable. Eject button Floppy drive power cable Floppy drive signal cable Red stripe to match Pin 1 on the connector 3.