Download Now
ASRock 2Core1333DVI-2.66G Driver

2CoreDVIG. Bundle with selected Dual Core CPU operating at FSB / GHz; * This motherboard also supports below CPU specifications. 2CoreDVIG. Bundle con selected Dual Core CPU operating at FSB / GHz; * This Scheda Madre also Supporta below CPU specifications. ASROCK 2COREDVIG DRIVER DOWNLOAD - Overclocking may affect your system stability, or even cause damage to the components and devices.


Type: Driver
132 (4.18)
Downloads: 1074
File Size: 23.37Mb
Supported systems: ALL Windows 32x/64x
Price: Free* [*Free Registration Required]

Download Now
ASRock 2Core1333DVI-2.66G Driver

This cap must be placed if returning the motherboard for after service.

Step 4. Close the socket: Rotate the load plate onto the IHS.

While ASRock 2Core1333DVI-2.66G down lightly on load plate, engage the load lever. Secure load lever with load plate tab under retention tab of load lever.

Asrock 2CORE1333DVI-2.66G - V1.0 Manuals

Before you installed the heatsink, you need to spray ASRock 2Core1333DVI-2.66G interface material between the CPU and the heatsink to improve heat dissipation. Ensure that ASRock 2Core1333DVI-2.66G CPU and the heatsink are securely fastened and in good contact with each other.

  • Asrock 2COREDVIG - V Manuals
  • 2Core1333DVI-2.66G - Asrock
  • Solvusoft: Microsoft Gold Certified Company

For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Apply thermal interface material onto center of IHS on ASRock 2Core1333DVI-2.66G socket surface. Place the heatsink onto the socket. Align fasteners with the motherboard throughholes.

ASRock > 2CoreDVIG

Rotate the ASRock 2Core1333DVI-2.66G clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners.


If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on ASRock 2Core1333DVI-2.66G motherboard. Step 5.

2CoreDVIG - Asrock Bios (21 views)

Step 6. Connect fan header with the CPU fan connector on the motherboard.


Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. Double Side, SS: If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in ASRock 2Core1333DVI-2.66G slots of the same color. ASRock 2Core1333DVI-2.66G you plan to install one above memory module, you can install it to any DDRII slot of this motherboard.

This motherboard does not support three or four above memory modules. Unlock ASRock 2Core1333DVI-2.66G DIMM slot by pressing the retaining clips outward. PCI slots: HDMR slot: PCIE Slots: Installing an expansion card Step 1.

Before installing the expansion card, please make sure that the power supply is switched off or the power cord is ASRock 2Core1333DVI-2.66G. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the bracket facing the slot that you intend to use.

Keep the screws for later use. Align the card connector ASRock 2Core1333DVI-2.66G the slot and press firmly until the card is completely seated on the slot.

Other Drivers