Asrock A55M-VS SATA RAID Driver
Download Asrock A55M-VS AMD All-in-1 Driver RC2 for Vista, Windows 7 (Motherboard) 4 x SATA2 Gb/s connectors, support RAID (RAID 0, RAID 1 and RAID 10), NCQ, AHCI 2 x SATA Data Cables (optional). ASRock A55M-VS -FM1 AMD A55 FCH Chipset DDR3 MicroATX 1 ; PCI Slots ; 1 ; Storage Devices ; SATA 3Gb/s ; 4 ; SATA RAID ; 0/1/10 ; Onboard Video. Build a ASRock ASRock A55M-HVS Mobo PC with our PC builder. RAID Support, yes. help icon The ASRock A55M-HVS has 6 SATA hard drive slots.
|Supported systems:||Windows 2008, Windows XP, Windows Vista, Windows 7/8/10|
|Price:||Free* [*Free Registration Required]|
Asrock A55M-VS SATA RAID Driver
Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before Asrock A55M-VS SATA RAID the cables. Connect to the power switch on the chassis front panel. You may congure the way to turn off your system using the power switch.
Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart.
ASRock A55M-VS User Manual
Connect Asrock A55M-VS SATA RAID the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the sys-tem is in S1 sleep state. Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front Asrock A55M-VS SATA RAID module to this header, make sure the wire assignments and the pin assign-ments are matched correctly. Serial port Header 9-pin COM1 see p. STEP 1: STEP 2: STEP 3: STEP 4: What is Hot Swap Function?
ASRock A55M-VS drivers
Please read below operation guide of Hot Plug feature carefully. Points of attention, before you process the Hot Plug: Please follow below instructions step by step to reduce the risk of HDD crash or data loss.
Points of attention, before you process the Hot Unplug: Then, the drivers compatible to your Asrock A55M-VS SATA RAID can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly.
Set up UEFI. Please use USB oppy or oppy disk.
Then you will see these messages, Please insert a diskette into the oppy drive. Formatting the oppy diskette will lose ALL data in it! Start to format and copy les [YN]?
Please insert a oppy diskette into the oppy drive, and press any key. After reading the oppy disk, the driver will be presented. Select the driver to install according to the OS you install.
You may also restart by turning the system off and then back on. Because Asrock A55M-VS SATA RAID UEFI software is constantly being updated, the following UEFI setup screens and descriptions are for reference purpose only, and they may not exactly match what you see on your screen. You can also use the mouse to click your required item.
Please note that overclocing may cause damage to your components and motherboard. It should be done at your own risk and expense.
Configuration options: The default value is [Auto]. Spread Spectrum This item should always be [Auto] for better system stability.