Download Now
ActionTec 56 CALL WAITING/INTERNAL Driver

Free Online Library: ACTIONTEC DISTRIBUTES CALL WAITING MODEMS TO Circuit City already carries Actiontec's Internal 56K ISA Master and 56K PCI. But ActionTec's 56Kbps Call Waiting modems use your call-waiting service to ensure you Price: $ (internal), $ (external), A Mini. i have an actiontec 56k v internal pci call waiting modem. on the box it says that it works in linux. i tried connecting to the net in linux it.


ACTIONTEC 56 CALL WAITING/INTERNAL DRIVER FOR WINDOWS 7

Type: Driver
Rating:
3.99
444 (3.99)
Downloads: 389
File Size: 12.26Mb
Supported systems: Windows XP, Windows Vista, Windows 7, Windows 7 64 bit, Windows 8, Windows 8 64 bit, Windows 10, Windows 10 64 bit
Price: Free* [*Free Registration Required]

Download Now
ActionTec 56 CALL WAITING/INTERNAL Driver

For DOS, Windows 3.

Actiontec Call Waiting Modem 56Kbps external call waiting modem Actiontec

Hardware Installation Caution: Always discharge static electricity before handling your modem. You may discharge static electricity by touching a ActionTec 56 CALL WAITING/INTERNAL metal structure or by using any commercially available grounding strap. If you are not familiar with computers or computer hardware or you cannot tell the difference between an ISA slot or PCI slot, obtain the help of someone who has a thorough understanding of computers.

DRIVERS: ACTIONTEC 56 CALL WAITING/INTERNAL

You will severely damage your computer if you install the modem in the wrong slot. The position of the expansion slots in your computer may differ from the illustrations shown.

Step 1 Turn off the computer and all peripheral devices connected to it. Step 2 Unplug the computer power cord from the wall outlet.

Actiontec 56k Internal Call Waiting Modem

Lift the expansion slot cover out as shown below. See the caution statement at the beginning of this section.

Figure 1: Ensure that the card is seated properly before securing it with the screw removed in Step 4, as shown in the following diagram. Figure 2: ActionTec 56 CALL WAITING/INTERNAL the Modem 8 Step 6 Put the chassis cover back on the computer. Step 8 Connect the telephone line cable to the Line Telco jack as shown below.

Figure 3: Connecting Devices On the rear panel of your modem are input jacks to connect devices to the modem. As shown in the diagram, there are jacks for connection to a phone and to a phone line.

Actiontec 56K USB Call Waiting Modem

To help reduce the load on your phone line, it is recommended that the modem be the only device connected. Step 2 After Windows 95 loads, it will detect new hardware. Check the drive path for the correct drive letter. Step 4 Windows will find the driver on the installation diskette and finish the installation process.

Step 6 Next, verify that the modem has been properly installed. On the windows taskbar, click Start.

ACTIONTEC DISTRIBUTES CALL WAITING MODEMS TO CIRCUIT CITY.

On the Start menu, click Settings, then click Control Panel. In Control Panel, double-click the Modems icon. The Modems Properties dialog box will appear.

ACTIONTEC 56 CALL WAITING/INTERNAL DRIVER

Click the Diagnostics tab. That this information has been displayed means the modem has been correctly installed and is functioning. Windows will complete the installation of the modem. Click Next.

Compare them with the illustration below. Click the Next button.

ACTIONTEC 56K USB CALL WAITING MODEM USER MANUAL Pdf Download.

A check mark will appear in the appropriate box. Make sure that all the other options are deselected, clicking them to deselect, if necessary.

Otherwise, the Wizard may report that it was unable to find the drivers. Click Finish.

Other Drivers